LILYPAD ARDUINO ATMEGA32U4

La placa LilyPad Arduino ha sido desarollada para las aplicaciones wearables y e-textiles (textiles electrónicos). Puede ser cosida en los tejidos y similares, los sensores y actuadores pueden ser conectados con hilos conductivos. La placa está basada en el ATmega32U4.

·                     Frecuencia de funcionamiento: 8 Mhz.

·                     Conector Micro USB

·                     Conector de entrada de bateria JST

·                     Interruptor ON/OFF

·                     Soporta comunicación Serie y USB

·                     Comunicaión I2C

·                     9 pines I/O digitales

·                     Software reset automático e inicialización de bootloader

·                     Diámetro Ø50

·                     1 placa Arduino ATMega32U4

The LilyPad Arduino USB is a microcontroller board based on the ATmega32u4. It has 9 digital input/output pins (of which 4 can be used as PWM outputs and 4 as analog inputs), an 8 MHz resonator, a micro USB connection, a JST connector for a 3.7V LiPo battery, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a battery to get started. The LilyPad Arduino USB differs from previous LilyPad boards in that the ATmega32u has built-in USB communication, eliminating the need for a separate USB-to-serial adapter. This allows the LilyPad Arduino USB to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board. The Arduino LilyPad USB has been designed to be used with wearables and e-textiles. It can be sewn to fabric using conductive thread, connecting it also to similarly mounted power supplies, sensors and actuators. The board comes pre-assembled and tested and can simply be programmed via the Arduino IDE, giving a platform for design and experimentation using fabrics with light and sound, etc.

·                     8MHz Resonator

·                     Micro USB connector

·                     JST connector for battery input

·                     On/Off switch

·                     Serial and USB communications

·                     Supports I2C (TWI) communications

·                     9x Digital I/O pins

·                     Automatic software reset and bootloader initialisation

·                     Dimensions Ø50mm