ESR METER TESTER MULTICOMPONENTE M328 12864 LCD TRANSISTOR DIODE TRIODE CAPACITA
ESR METER TESTER MULTICOMPONENTE M328 12864 LCD TRANSISTOR DIODE TRIODE CAPACITANCE LCR
The latest M328 version, with more functions than ever, uses Atmega328 Chip. Backlight Large LCD 12864 display, easy to read the value. Please use a 9V battery as power supply, or use two lithium batteries to consist of long term 8.4V power supply (The batteries are not included).
Inductors, Capacitors, Diodes, Dual Diode, Mos, Transistor, SCR, The Regulator, LED Tube, ESR, Triode, Resistance, Adjustable Potentiometer
- Resistance: 0.1 ohm resolution, maximum 50M ohm
- Capacitor: 1pF resolution, 25pf - 100,000 uf
- Inductors: 0.01mh-20H
- Dimensions: 60 x 70 x 15mm
1. One-button operation, automatic shutdown, save the power.
2. Automatically detect the voltage after power on.
3. Automatically detect the NPN and PNP transistors, N-channel and P-channel MOSFET, diode (including double diode), thyristor, transistor, resistor and capacitor and other components.
4. Automatically indentify the arrangement of the pin of the component, and display on the screen.
5. Can detect the amplification factor and the basic data of the transistor and MOSFET protection diode to determine forward the biased voltage of the emitter transistor.
6. Measure the gate and gate capacitance of the MOSFET threshold voltage.
7. High threshold voltage and high current amplification factor to identify Darlington transistors.
8. Can protectively detect bipolar transistors and MOS transistors diodes.
9. Can simultaneously measure two resistors and resistor symbol display. Up to 4-digit value and unit display. The number on both ends of the resistor symbol is the pin number (1-3). Potentiometer is also detectable, but if the potentiometer was adjusted to one end, the tester will not able to detect the pin number of the middle or ends.
10. Can test the ESR (Equivalent Series Resistance) capacitance values of the capacitors with more than 2uF. 2-digit value with a resolution of 0.01 ohms.
11. Display correct direction for two diodes and forward voltage drop.
12. LED will be identified as a diode with a hight forward voltage drop. Dual LED will be identified as two diodes.
13. Zener diode can be identified, if the reverse breakdown voltage is less than 4.5V.
14. Can measure the reverse capacitance of a single diode.
15. Can be obtained with a single measurement rectifier bridge connection.
Notice: Please discharge the capacitor before measuring the capacitance, or the meter will be easily damaged.
1 x Mega328 Transistor Tester Diode Capacitance ESR Meter MOS PNP/NPN M328